Mender blog

Showing posts tagged: debian x

Configuring QT Creator for Yocto with OTA Updates | Mender

16th Sep 2021

This is a guide to configuring QT Creator to perform application updates to Yocto based devices incorporating OTA updates from the experts at Mender. You may be looking to deploy applications made in Qt onto your fleet of IoT devices.In a very significant tutorial on the Mender Hub community platform, embedded engineer Mirza Krak explains how to take an application developed in Qt Creator and d...

Read the article

Debian and OTA software updates in an IoT project

15th Sep 2021

Mender supports secure and robust OTA updates of Debian-based Operating System images such as Raspberry Pi OS. The Debian family of OS are highly functional and provide a range of options for running embedded devices in an IoT project. Debian is often seen as a good starting point when setting up a proof of concept in an IoT project as it is relatively easy to set up and configure and there is a t...

Read the article

Debian operating system and software platform for your Raspberry Pi

30th Jun 2021

You must decide how to start out and which operating system and software platform to build your IoT product on. A key consideration will be to start with some version of Debian (Raspberry Pi OS or Raspbian) or go straight for a custom Linux distribution such as Yocto or Buildroot?

Debian on a Raspberry Pi

Bear in mind, if you start with a version of Debian for your Raspberry Pi then this come...

Read the article

Beaglebone vs Raspberry Pi - Choosing the Right SBC

Both the BeagleBone Black and Raspberry Pi family of boards provide solid, affordable single board computer options for your embedded systems project. If you want to add robust and secure OTA system updates to your devices then Mender.io will support both.

Which board to select for your project?

Which board you select may boil down to a few factors such as your level of reliance on community...

Read the article

Easily update all of your device software

Mender 2.3 made a giant leap simplifying software updates for the top three use cases: System, application and configuration updates. We’ve made it easier to update these key use cases in OS environments that are most popular such as Ubuntu, Debian and Raspbian. The overall results: 47% fewer steps and 56% less time from setup to first deployment. Here’s how:

Read the article