Category
engineering
What Is a Mender Update Module, How It Works and Why Use It?
In Mender taxonomy, an Update Module is essentially a method for deploying over-the-air (OTA) software updates with the advantage of customizability and fl
Linux IoT development: adjusting from a binary OS to the Yocto Project workflow
In embedded Linux development, there are two approaches when it comes to what operating system to run on your device. Either build your own distribution (w
Raspbian update breaks devices
A couple of days ago there was an incident involving Raspberry Pi devices running Raspbian. During a period of time devices could brick if you perform an ‘
Update Modules are coming - test them today!
Support for update modules is soon coming to Mender! Technically, an update module implements one or more of the actions that the Mender client carries out
Updating Raspbian remotely
If you are using a Raspberry Pi with the Raspbian OS, a new way to update it remotely is available! Robust updates Today there are some common ways Raspber
Mender integration with the Toradex Colibri iMX7
We have provided a How-to guide on getting Mender OTA integrated to the Toradex Colibri iMX7. This will show you how to get a Yocto build with Mender integ
Porting the Mender client to Orange Pi | guest blog post
This is a guest blog post from one of our valued community members, Marek Belisko, on porting the Mender over-the-air software update solution to the Orang
Introducing automatic U-Boot patching
In the rocko branch of the meta-mender layer, we have just added a new feature which allows U-Boot to be auto-configured, avoiding the need to do the tedio
Why the Yocto Project for my connected devices?
This month, Mender's own Drew Moseley wrote a blog post on "Why the Yocto Project for IoT" on Embedded.com. It outlines many of the reasons why we chose it